Mode setup – Panasonic WJ-NT104 User Manual
Page 41
41
■
MODE SETUP
On the
ADMINISTRATOR SETUP PAGE
, click the
MODE SETUP
button to display the
MODE SETUP
window.
Select the operation mode, image quality and camera control.
q
VIDEO INPUT SELECTION MODE
Select an operation mode for the camera displayed on
the monitor.
The factory default setting is RANDOM INPUT SELEC-
TION MODE.
w
INPUT CHANNEL
This item is available in FIXED INPUT SELECTION
MODE only. Select a channel for display on the moni-
tor.
The factory default setting is CH1
e
VIDEO INPUT CHANNEL ON/OFF
This item is available in RANDOM INPUT SELECTION
MODE or MULTI INPUT SELECTION MODE only.
• RANDOM INPUT SELECTION MODE
Channels set to OFF will not be displayed. In
sequence mode, such channels are skipped.
• MULTI INPUT SELECTION MODE
If a channel set to OFF is selected, the frame rate
goes up because images are captured by skipping
the channel set to OFF.
The factory default setting for channels are ON.
r
INPUT CHANNEL SEQUENCE
This item is available in
RANDOM INPUT SELECTION
MODE
only.
Set sequence operation to ON or OFF.
The factory default setting is OFF.
t
SEQUENCE INTERVAL
This item is available in
RANDOM INPUT SELECTION
MODE
only. It defines the dwell time (time until
changeover to the next channels) for sequence opera-
tion.
Dwell time can be set to a value between 1 and 30 sec-
onds in increments of 1 second.
The factory default setting is 2 Sec.
y
MAIN PAGE DEFAULT INDEX FILE SELECT
Set the window to be displayed when only a URL is
specified on the LOCATION bar.
Note:
If OTHERS is marked, the name specified next to
File name will open the MAIN PAGE window.
The factory default setting is index1.html
q
e
r
t
y