Panasonic WJ-NT104 - Manual (Page 47)

47
■ MODEM SETUP
On the ADMINISTRATOR SETUP PAGE , click the MODEM button to display the MODEM/TA SETUP window. Select the
modem or TA (terminal adapter) for the PPP connection.
q MODEM MODELS
Set a modem mode. Depending on the set value, the
modem initializing command is issued. Select manual
setting or standard modem.
The factory default setting is
MANUAL SETTING .
w MODEM INITIALIZE COMMAND
This command is valid when MANUAL SETTING is
selected for MODEM MODELS .
Refer to the manual for the modem and set the initializ-
ing command.
e LINE TYPE
Select the type of telephone line to use. The factory
default setting is
TONE .
r LOCAL TELEPHONE NUMBER
Set a telephone number for the WJ-NT104.
t DESTINATION TELEPHONE NUMBER
Set the destination telephone numbers in case the
alarm notice function is used.
y LOGON ID
Set an ID code to log into the destination network when
making calls from the WJ-NT104.
u LOGON PASSWORD
Set a password to log into the destination network
when making calls from the WJ-NT104.
i REDIAL (NUMBER OF TIMES/INTERVAL)
In case of failure of the PPP connection, the number is
redialed for the set number of times.
The factory default setting is 2 retries at intervals of 60
seconds.
o CONNECTION TIME (After alarm notice)
Set a time to automatically disconnect the line after the
WJ-NT104 accesses an alarm notice recipient. The
time countdown starts with completion of alarm notice
processing. The factory default setting is 0 minute.
q
w
e
r
t
y
u
i
o