Setup, Control operation – Panasonic WJ-NT104 User Manual
Page 62
62
●
Setup
In the
SERIAL PORT SETUP
window, set TYPE under RS-232C SETUP or RS-485 SETUP to "WJ-SX550A". Set the same
communication parameters as for the Matrix Switcher. (For further details refer to the operation manual of the WJ-SX550A
Matrix Switcher.) Click the link to [MATRIX SW CONFIGURATION page] at the bottom of the
SERIAL PORT SETUP
win-
dow to open the MATRIX SWITCHER CONFIGURATION window.
q
PASSWORD
Enter the same 5-digit password as set for the Matrix
Switcher.
w
VIDEO-INPUT NUMBER AND MONITOR-OUT CHAN-
NEL SETUP
Set a channel number for the monitor output of the WJ-
WJ-SX550A Matrix Switcher to be connected to the
video input connector on the WJ-NT104 network inter-
face unit. The status when selecting VIDEO-INPUT (at
WJ-NT104) in the above table is the same as when a
monitor compatible with the WJ-SX550A is selected.
●
Control Operation
On the Location bar, type the URL http://192.168.0.10/sxindex.html to access the WJ-SX550 OPERATION VIEW window for
the Matrix Switcher.
q
w
e
r
t
!0
!3
!1
!2
q
w
!4
!5
y
u
i
o