Printronix T5000e Series - Manual (Page 53)

Advanced Validator Options
53
For the Infinite option, the printer will stop every 5 retry attempts.
After you clear the error message, the printer will attempt to print
the same label. It will not attempt to print the next label until the
previous (problem) label has printed correctly.
Advanced Validator Options
The following items are considered advanced items and are only
visible if the Advanced menus are selected. Refer to the
configuration section of your
User’s Manual for more information.
Decodeability
You can determine how strict the validator grades the wide/narrow
bars and spaces which compose the bar code by setting the
Decodeability parameter to a percentage value from 30% to 90%.
The higher the percentage value chosen, the stricter the validator
grades.
For example, if the Decodeability value is set to 37%, the validator
gives the bar code a failing grade if the decodeability of the bar
code is at or below 37%.
1. Press to take the printer offline and place the printer in
Menu mode.
2. If necessary, press ↓ and ↵ at the same time to unlock the
↵ key.
3. If necessary, press until “VALIDATOR” displays.
4. Press
↓ until “Decodeability” displays.
5. Press + or – to scroll through the percentage values: 30% to
90%. The default is 37%.
6. Press ↵ to select the desired value.
7. Press
↓ and ↵ at the same time to lock the ↵ key, then press
PAUSE to take the printer offline.
8. Press PAUSE again to put the printer online.
..
.
..
.