Panasonic KX-P8410 - Manual (Page 32)

32
Setup
■ Loading an Envelope
Do not insert more than one envelope at a time. Only black text can be printed
on envelopes. For more detailed information on envelopes, refer to
page 158 .
Set the media thickness switch ( ☞ P. 29) .
Adjust the media guides to the width of the envelope.
Insert the envelope with the short end entering the printer first
and the printing side facing up. The edge where the stamp is
located enters the printer last.
Use the printer driver to select Envelope in the Paper size menu
and the Paper source menu.
■ Loading Labels
For detailed information on labels, refer to page 157 .
Set the media thickness switch ( ☞ P. 29) .
Adjust the media guides to the width of the label sheets.
Insert the label sheets in the multi-purpose tray with the printing
side up and the top of the sheets enter first.
The height of labels should not exceed the limit mark on the guide.
Use the printer driver to select Label.
1
2
4
1
2
4
3
3