Panasonic KX-P8410 - Manual (Page 110)

110
Care and Maintenance
# Hold the fuser as shown below, and slide it out of the printer.
Safety Caution:
B The fuser unit weighs approximately 3.1 k g {6.8 lbs.}. Take care when handling
it.
$ Close the front door.
Remove the oil supply roll:
# Press out on tabs to unlock the oil supply roll.
$ Remove the oil supply roll out of the fuser.
Note:
B If the paper is not jammed in the fuser unit, perform the following.
# Repeat steps 1 to 4 of Jam B on page 108 .
$ Skip step 4 and go to step 5.
2
#
$
3
$ #
#