Panasonic KX-P8410 - Manual (Page 118)

118
Check the density setting
by printing the Color
Calibration Page in the
Color Calibration menu
from the printer panel.
Compare the settings
with the color density
samples on the Color
Calibration Card and, if
necessary, adjust the
density from the printer
panel. Refer to Setting
the Color Density on
page 54 .
Small white spots
appear on OHP
transparency.
Care and Maintenance
The toner cartridge is
almost depleted and is
not properly applying
toner. Replace the color toner
cartridge.
Trouble
The toner is almost
depleted.
Corrective Action
A single color has a
sharp, dark or light
vertical streak.
Possible Cause
Replace the color toner
cartridge soon
(depending on the
complexity of your prints,
you can continue to print
up to 100 more pages).
The color density is set
incorrectly in the printer
panel. A single color appears
faded.
Remove dust or stain
from OHP transparency. OHP transparency has
dust on its surface.