Panasonic KX WP1050 User Manual
Page 214
Useful Information
214
For assistance, please visit http://www.panasonic.com/help
Voicemail:
Settings:
Software update:
Invalid number.
L
Enter the phone number including country code (page
84).
Display message
Cause/solution
Greeting message
playback failed.
L
There was a problem with data transmission.
L
Check the link status to the wireless LAN on the
handset, flash patterns of the WAN indicator on the
base unit, and so on. Then try again later.
Display message
Cause/solution
Invalid
L
The settings you entered are not correct.
L
Press {OK} and enter correctly.
Handset could not
register.
Please try again.
L
Press {OK} i Press and hold the LOCATOR button
on the base unit for 4 seconds again until you see the
LOCATOR indicator on the base unit flashing in green.
Display message
Cause/solution
The battery level
is too low to
proceed with the
update process.
L
The battery level is too low to update software/firmware.
L
The battery level needs to be medium or full.
L
Recharge the battery and press {OK} to proceed again.
The device must be
updated before it
can be used. This
requires a network
connection.
Continue?
L
Software/firmware may be defective and requires a
software/firmware update (page 118).
Display message
Cause/solution
WP1050.book Page 214 Wednesday, April 25, 2007 6:01 PM