Panasonic KX WP1050 - Manual (Page 188)

Base Unit Settings
188 For assistance, please visit http://www.panasonic.com/help
Load Settings:
The base unit settings can be loaded from a backup file. If you reset the base unit settings
to factory default, the Load Settings page can load its settings from the backup file.
Note:
L The backup file contains network settings. When these settings are loaded, all network
settings except for the user name and password for the base unit are changed as they
were saved.
1
Click [Advanced Setup] on the Top Menu.
2
Click the [Maintenance] tab, then click [Load Settings].
3
Enter the file name under the Load Settings heading.
L You can also click [Browse...] to select the desired backup file name on the Choose
file dialog box, and click [Open].
4
Click [Load].
5
Click [Restart].
L
The base unit restarts and the Top Menu is displayed.
WP1050.book Page 188 Wednesday, April 25, 2007 6:01 PM