Panasonic KX WP1050 User Manual
Page 197
Base Unit Settings
For assistance, please visit http://www.panasonic.com/help
197
L
IP address and Subnet Mask under the WAN heading show the current WAN side
settings of the base unit.
L
IP address, Subnet mask and Starting IP address (DHCP Server) under the LAN
(settings) heading show the current LAN side settings of the base unit.
1
Enter IP address, Subnet Mask and Starting IP address (DHCP Server) under the LAN
(temporary) heading.
L
See also the Help on the LAN (temporary) heading for data entry.
2
Click [Apply].
L
The restarting page is displayed when the entered IP address, Subnet mask and
Starting IP address (DHCP Server) are correct.
Setting
Description
[IP Address]
L
Enter the IP address and subnet mask corresponding to your
temporary local network.
L
Set the third number (0 – 255) separated by periods different
from that of the WAN, such as “192.168.101.1”
Note:
L
There are some restrictions on IP address entry. For
example, “0.0.0.0” and “255.255.255.255” are not available.
[Subnet Mask]
[Static IP Address
(DHCP Server)]
L
Enter the starting IP address for the DHCP server’s IP
assignment.
L
Set the third number (0 – 255) separated by periods same as
that of the LAN (temporary) you set above, such as
“192.168.101.100”
WP1050.book Page 197 Wednesday, April 25, 2007 6:01 PM