Printronix Series 5 - Manual (Page 169)

4–116 Configuration Menus
DIAGNOSTICS Menu
Diagnostics
(From 4–13 )
On: X.X hrs
Print: X.X Hrs
Print Strokes
Print Lines
11 inch Pages
Printer Tests Test Width Paper Out Dots System Memory Print Statistics
Full Width *
80 col. 40 dots *
4–76
X Megabytes
* = Factory default
Shift Recycle*
All E’s
E’s and TOF
All H’s
All Underlines
All Black
Shuttle Slow
Shuttle Fast
Shuttle Only
Phase Printer
1 to 2000
217 (500 lpm)*
123 (800/900 lpm)*
82 (1200/1400 lpm)*
Paperout Adj.
Burnin Test Print Error Log
Clear Error Log
E–net Test Page
1 1 If Ethernet adapter is present.
Printer Tests
The printer tests are used to check the print quality and operation of your printer.
NOTE: Your authorized service representative will typically run these tests.
They are described in more detail in the Maintenance Manual .
•
Shift Recycle – A sliding alphanumeric pattern that identifies missing or
malformed characters, improper vertical alignment, or vertical
compression.
•
All E’s – A pattern of all uppercase E’s that identifies missing
characters, misplaced dots, smeared characters, improper phasing
problems, or light/dark character variations.
•
E’s plus TOF – A pattern of all E’s followed by a form feed to the next
page top–of–form, that identifies paper motion or feeding problems.
•
All H’s – A pattern of all uppercase H’s used to detect missing
characters, misplaced dots, smeared characters, or improper phasing.