Local contact directory, Local contact directory –9, A new – Polycom SoundPoint IP 601 User Manual
Page 63
Configuring Your System
4 - 9
IP 4000, 6000, and 7000 conference phones are full-duplex speakerphones. The
SoundPoint IP 301 phones is a listen-only speakerphone. The SoundPoint IP
phones provide dedicated keys for convenient selection of either the
speakerphone or headset.
//www.polycom.com/usa/en/support/voice/soundpoint_ip/VoIP_T
echnical_Bulletins_pub.html
.
Configuration changes can performed centrally at the boot server or locally:
Local Contact Directory
The phone maintains a local contact directory. The directory can be
downloaded from the boot server and edited locally (if configured in that
way). Contact information from previous calls may be easily added to the
directory for convenient future access.
The directory is the central database for several other features including
speed-dial, distinctive incoming call treatment, presence, and instant
messaging.
Central
(boot server)
Configuration file:
sip.cfg
Enable or disable persistent headset mode.
For more information, refer to
on page
Enable or disable hands-free speakerphone mode.
•
For more information, refer to
on page
Configuration file:
phone1.cfg
Specify whether or not the electronic hookswitch is enabled and what
type of headset is attached.
•
For more information, refer to
on page
Local
Web Server
(if enabled)
Enable or disable persistent headset mode.
Navigate to: http://
Local Phone User
Interface
Enable or disable persistent headset mode through the Settings
menu (Settings > Basic > Preferences > Headset > Headet
Memory Mode).
Enable or disable hands-free speakerphone mode through the
Settings menu (Settings > Advanced > Admin Settings > Phone
Settings).
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will permanently
override global settings unless deleted through the Reset Local
Config menu selection and the
removed from the boot server.