Application configuration file changes, Video
Administrator’s Guide Addendum for the Polycom VVX 1500 Business Media Phone
1 - 9
Application Configuration File Changes
Background
This configuration attribute is defined as follows:
Video
These configuration attributes are defined as follows:
Attribute
Permitted
Values
Default
Interpretation
bg.VVX_1500.color.selection
w,x
1,1
Specifiy which type of background (w) and index
for that type (x) is selected on reboot where w=1
to 3, x=1 to 6.
The type of backgrounds are built-in (w=1), solids
(w=2), and bitmaps (w=3).
w=2 is used when selecting any image as a
background.
w=3 is used when selecting any image from the
Digital Picture Frame as a background. This
image is stored under “Local File”. Only one local
file at a time is supported.
bg.VVX_1500.color.bm.x.name
any string
Null
Graphic files for display on the phone .
For example, if you set
bg.VVX_1500.color.bm.1.name
to
Polycom.bmp, the user will be able to select
“Polycom.bmp” as a background on the phone.
Attribute
Permitted
Values
Default
Interpretation
video.enable
0=Disable,
1=Enable
Null
Flag to determine whether or not video calls are
established. This applies to all calls, between two
Polycom VVX 1500s and between
Polycom VVX 1500 and any other video device.
If set to 1 (enabled) or Null, video is sent in
outgoing calls and received in incoming calls.
If set to 0, video is not sent in outgoing calls and
not received in incoming calls. All calls are audio
only.
video.autoStartVideoTx
0, 1
Null
Flag to determine whether or not video
transmission occurs when a call starts.
If set to 0, video transmission does not start.
If set to 1or Null, video transmission from the near
end starts when a call starts.