Polycom SoundPoint IP 601 - Manual (Page 102)

Administrator’s Guide SoundPoint IP / SoundStation IP
4 - 48
Configuration File Changes
You must make the the following changes to the parameter that
is defined in the sip.cfg configuration file:
feature.18.enabled="1"/>
Action String Example
The action string
“$Changup$*444*$P1N4$$Tinvite$$Cwaitconnect$$P2N3$$Cpause2$$Tdt
mf$$Changup$
” is executed as follows:
1. The user is prompted for 4 digits. For example, “1234”.
2. The user is prompted for 3 digits. For example, “567”.
3. The user’s active call is disconnected.
4. The string “*444*1234” is sent using the INVITE method.
5. Once connected, there is a 2 second pause, and then the string “567” is
sent using DTMF dialing on the active call.
6. The active call is disconnected.
Speed Dial Example
Your organization voice mail system is accessible through 7700 and your voice
mail password is 2154. You could use a speed dial key to access your voice
mail if you entered “7700$Cpause3$2154” as the contact number.
Enhanced Feature Key XML Files
You must ensure that the following XML code exists for the definition of “Call
Park”:
...
...
efk.efklist.2.mname="callpark"
efk.efklist.2.status="1"
efk.efklist.2.label="Call Park"
efk.efklist.2.use.idle="1"
efk.efklist.2.use.active="1"
efk.efklist.2.use.alerting="1"
efk.efklist.2.use.dialtone="1"
efk.efklist.2.use.proceeding="1"
efk.efklist.2.use.setup="1"
efk.efklist.2.type="invite"
efk.efklist.2.action.string="*68*$P1N10$"
...
/>
efk.efkprompt.1.status="1"
efk.efkprompt.1.label="Enter Number: "