Ip tos Page 210: Call control
Page 210: Call control
Administrator’s Guide SoundPoint IP / SoundStation IP
A - 56
RTP
These parameters apply to RTP packets.
Call Control
These parameters apply to call control packets, such as the network protocol
signaling.
Other
These default parameter values are used for all packets which are not set
explicitly.
IP TOS
The following settings control the “type of service” field in outgoing packets:
•
•
Attribute
Permitted
Values
Default
Interpretation
qos.ethernet.rtp.user_priority
0-7
5
User-priority used for RTP packets.
Attribute
Permitted
Values
Default
Interpretation
qos.ethernet.callControl.user_priority
0-7
5
User-priority used for call control
packets.
Attribute
Permitted
Values
Default
Interpretation
qos.ethernet.other.user_priority
0-7
2
User-priority used for packets that
do not have a per-protocol setting.