Panasonic PT-DW8300U - Manual (Page 95)

NETWORK menu
ENGLISH -
95
Settings
Network connections
The projector is equipped with network functions, and web browser controls can be used to carry out the following
operations from a computer.
Projector settings and adjustments z
Projector status display z
Transmission of E-mail messages if there is a problem with the projector z
Note
A LAN cable is required to use the network function. z
A Web browser is required to use this function. Make sure that a Web browser is available in the system. z
Supported OS: Windows XP/Windows Vista/Windows 7, Mac OS X v10.4/v10.5/v10.6. z
Supported browser: Internet Explorer 6.0/7.0/8.0, Safari 2.0/3.0/4.0 (Mac OS). z
To use the E-mail function, communication with E-mail server must be established. Make sure that E-mail z
feature is available in your system.
Use a straight insulated LAN cable which supports category 5 or above. z
The length of LAN cable must be 100 m or shorter. z
J
Name and function of network function parts
Attention
If the LAN terminal is touched by electrostatically charged hands (or body), failure may be caused by the discharge of static z
electricity.
Be careful not to touch metallic part of LAN terminal or LAN cable.
Connect indoor equipment to the LAN. z
LAN cable (straight)
Projector
LAN switch
LAN cable (straight)
Computer
LAN10/100 lamp (yellow)
This lights when a 100BASE-TX connection
is established.
LAN terminal (10BASE-T/100BASE-TX)
Connect LAN cable here.
LAN LINK/ACT lamp (green)
This lights when a LAN cable is connected
and flashes when signals are being received
or sent.