Panasonic PT-DW8300U - Manual (Page 56)

PICTURE menu
56
- ENGLISH
Settings
SHARPNESS
This adjusts the sharpness of the pictures.
Press ▲▼ to select [SHARPNESS]. 1 )
Press ◄► or button. 2 )
The [SHARPNESS] individual adjustment z
screen will be displayed.
Press ◄► to adjust the level. 3 )
Operation Adjustment
Adjustment
range
Press ►.
Contours become
sharper.
0 - 15
Press ◄.
Contours become
softer.
NOISE REDUCTION
This can be used to adjust pictures if they contain
interference as a result of poor quality of the input
signal.
Press ▲▼ to select [NOISE 1 )
REDUCTION].
Press ◄► or button.
2 )
The [NOISE REDUCTION] individual z
adjustment screen will be displayed.
Press ◄► to switch [NOISE 3 )
REDUCTION].
The setting will change as follows each time z
◄► is pressed.
1 (Low) 2 (Medium)
OFF (No correction) 3 (High)
Attention
[NOISE REDUCTION] is set active when the selected z
input signal has less noise. Applying noise reduction may
affect the image quality, if so, set to [OFF].
DYNAMIC IRIS
Pictures with the optimum contrast will be displayed
by automatically providing aperture compensation and
signal compensation to suit the pictures concerned.
Press ▲▼ to select [DYNAMIC IRIS]. 1 )
Press ◄► or button. 2 )
The [DYNAMIC IRIS] individual adjustment z
screen will be displayed.
Press ◄► to switch [DYNAMIC IRIS]. 3 )
The setting will change as follows each time z
◄► is pressed.
OFF
(No correction)
1 (Low)
2
(Intermediate)
USER 3 (High)
J
To further adjust the selected
compensation amount
Select [USER] in step 3). 4 )
Press button. 5 )
The [DYNAMIC IRIS] screen will be displayed. z
Press ▲▼ to select the item to be 6 )
adjusted, and press ◄► to adjust the
amount of correction.
AUTO IRIS (Automatic aperture
Q
adjustment)
OFF (No automatic
adjustment)
1 (Low)
255 (High)
2…254
(Intermediate)
MANUAL IRIS (Fixed aperture Q
adjustment)
OFF (No fixed iris) 1 (Low)
255 (High)
2…254
(Intermediate)
DYNAMIC GAMMA (signal
Q
compensation amount adjustment)
OFF (No automatic
correction)
1 (Low)
3 (High) 2 (Intermediate)
Note
The contrast is set to the maximum level when [DYNAMIC z
IRIS] is set to [3].