Panasonic PT-DW8300U - Manual (Page 90)

TEST PATTERN menu
90
- ENGLISH
Settings
Managing the sub memory
list
You can restore the sub memory data when using
signals from the same input source. Sub memory data
contains the setting information of screen and image
adjustments, such as BRIGHTNESS, CONTRAST or
ASPECT.
J
Registering the current settings
to the list
In the normal screen (when the menu 1 )
is not displayed), press ◄► button.
The signal must be registered before creating a z
sub memory data of the signal.
Displays the list of corresponding sub memory z
data to the signal.
Press ▲▼◄► to select the required 2 )
sub memory data.
Press button.
3 )
The [ SIGNAL NAME] screen will be displayed. z
Press button. 4 )
Note
For renaming a registered data, follow the same z
procedure (steps 4 - 5) of “Renaming a registered data”
( Æ page 89).
J
Displaying the sub memory list
and restoring the settings
In the normal screen (when the menu 1 )
is not displayed), press ◄► button.
The [SUB MEMORY LIST] screen will be z
displayed.
Press ▲▼◄► to select the required 2 )
sub memory data, and press
button.
The [REGISTERED SIGNAL STATUS] screen z
will be displayed.
Press button. 3 )
Restores the settings in the data. z
J
Deleting a sub memory data
In the normal screen (when the menu 1 )
is not displayed), press ◄► button.
The [SUB MEMORY LIST] screen will be z
displayed.
Press ▲▼◄► to select the required 2 )
sub memory data, and press
button.
The [REGISTERED SIGNAL STATUS] screen z
will be displayed.
Press button. 3 )
Displays the [SUB MEMORY LIST] with z
change.
You can return to the previous step by pressing z