Osd adjustments (continued) – Philips V30 User Manual

Page 8

Go to cover page

OSD Adjustments (Continued)

2) Press the

button until ADJUST VERTICAL is highlighted.

3) Press the

button. The ADJUST VERTICAL window appears.

ADJUST POSITION should be highlighted.

4) Press the

button to move the image up or down.

5) When the position is adjusted, press the

button to return to MAIN

CONTROLS window, or press the

button to highlight ADJUST SIZE.

6) To adjust the vertical size, press the

button.

7) When the size is adjusted, press the

button to return to MAIN

CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.

After returning to MAIN CONTROLS . . .

. . . to continue to ADJUST SHAPE, press the

button until ADJUST

SHAPE is highlighted. Next, start with step 3 under ADJUST SHAPE
and follow the directions.

. . . to exit completely, press the

button

ADJUST SHAPE

ADJUST SIDE CURVE

ADJUST SIDE CURVE under ADJUST SHAPE allows you to adjust two
of the five preset options. These two options are PINCUSHION and
BALANCED pincushion. Note: use these features only when the picture
is not square.

1) Press the

button on the monitor. The MAIN CONTROLS window

appears.

Smart Help

2) Press the

button until ADJUST SHAPE is highlighted.

3) Press the

button. The ADJUST SHAPE window appears.

ADJUST SIDE CURVE should be highlighted.

4) Press the

button. The SIDE CURVE window appears.

PINCUSHION should be highlighted.

5) To adjust the pincushion, press the

button.

6) When the pincushion is adjusted, press the

button to highlight

BALANCED or press the

button to return to the ADJUST SHAPE

window.

7) To adjust the balanced pincushion, press the

button.

8) When the balanced pincushion is adjusted, press the

button to

return to the ADJUST SHAPE window. BACK TO MAIN WINDOWS will
be highlighted.

9) Press the

button to return to the MAIN CONTROLS window, or

press the

button until ADJUST SIDE ANGLES is highlighted.

107T5