Osd adjustments (continued) – Philips V30 User Manual
Page 11
11
OSD Adjustments (Continued)
9
Go to cover page
ADJUST MOIRE
EXTRA CONTROLS is a set of three features, including ADJUST
MOIRE. Moire is a fringe pattern arising from the interference between
two superimposed line patterns. To adjust your moire, follow the steps
below. Note: Use only if necessary. By activating ADJUST MOIRE,
sharpness can be affected.
1) Press the
button on the monitor. The MAIN CONTROLS window
appears.
2) Press the DOWN CURSOR button until EXTRA CONTROLS is
highlighted.
3) Press the
button. The EXTRA CONTROLS window appears. will
be highlighted.
ADJUST MOIRE will
4) Press the
button. The ADJUST MOIRE window appears.
HORIZONTAL will be highlighted.
5) To adjust the horizontal moire, press the
or
button.
4) Press the
or
button to select YES or NO. NO is the default. YES
returns all settings to their original factory adjustments.
5) Press the
button to confirm your selection and return to the MAIN
CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
After returning to MAIN CONTROLS . . .
. . . to continue to EXTRA CONTROLS, press the
button until EXTRA
CONTROLS is highlighted. Next, start with step 3 under EXTRA
CONTROLS.
. . . to exit completely, press the
button.
EXTRA CONTROLS
Smart Help
6) When the horizontal moire is adjusted, press the
button to highlight
VERTICAL.
7) To adjust the vertical moire, press the
or
button.
8) When the vertical moire is adjusted, press the
button to return to
the EXTRA CONTROLS window. BACK TO MAIN CONTROLS will be
highlighted.
Smart Help
After returning to MAIN CONTROLS . . .
. . . to continue to DEGAUSS, press the
button until
is
highlighted. Next, start with step 3 under EXTRA CONTROLS,
DEGAUSS.
. . . to exit completely, press the
button.
DEGAUSS
107T5