General product specification – Philips V30 User Manual
Page 57
57
107T5
GENERAL PRODUCT SPECIFICATION
Go to cover page
17" V30 GS4 107T5-71K CMTR
TYPE
: 107T51/00
BRAND
: PHILIPS
2003-01-07
Wayne Lin
2003-01-07
30
15
590
3.9
Phosphor protection
The display device is sufficiently protected against the burning of phosphors in
case of repetitive power cycling or absence of horizontal deflection.
3.10
Low emission requirements (MPRII/TCO99/TCO95)
---------------------------------------------------------
Items
Band I
Band II
ELF (rms)
VLF (rms)
Alternating Electric
MPRII < 25 V/M
MPRII < 2.5 V/M
Field
TCO < 10 V/M
TCO < 1.0 V/M
Magnetic Field
MPRII < 250 nT
MPRII < 25 nT
TCO< 200 nT
TCO < 25 nT
Electrostatic
Potential
< +/- 500 V
Band I : 5 to 2K HZ.
Band II : 2K to 400K HZ.
Test procedure according to low emission and E.S.P. test method.
3.11
Display data channel : DDC2B (VESA STANDARD)
The DDC HEX Data (refer sheet 190) should be written into the
DDC IC (24LC21 or equivalent)
4.0
Display image (CRT facing east)
The monitor is aligned in a magnetic cage having the
following magnetic field components :
Northern Hemisphere : H = 0, V = 450 mG, Z = 0
Southern Hemisphere : H = 0, V = -500 mG, Z = 0
Equatorial
: H = 0, V =
0 mG, Z = 0
Conditions for visual testing, unless otherwise stated:
Input video signal
- 700 mVpp cross hatch
Brightness control
- center(50%)
Contrast control
- maximum(100%)
4.1
Display resolutions
See 3.1.3