Windows host configuration, Windows vista setup – Printronix Integrated Network Interface Card User Manual
Page 96
Chapter 4
Windows Host Configuration
92
Windows Host Configuration
This section covers Windows Vista, XP, 2000, and 2003 Server
printer setup.
Windows Vista Setup
This installation procedure assumes that the Ethernet adapter is
configured with the correct IP address, subnet mask and gateway
(if required). In addition, the administrator can “ping” and Telnet to
the Ethernet adapter from the server console. If this is not the case,
use the printer front panel to configure the Ethernet adapter before
proceeding.
1.
Select Windows Drivers from the CD. The Printer Driver Setup
Wizard window displays.
Figure 27. Setting Up The IPS Printer Driver
2.
Click Next.
3.
Select “Add a local printer” and click Next.