Printronix Integrated Network Interface Card - Manual (Page 187)

Printer Sharing Parameters
183
V3R2 CRTPSFCFG
CHGPSFCFG ACTTMR *NOMAX The value specifies the
number of seconds that
PSF/400 will wait for a
printer to respond to an
activation request. If
only one system will be
using the printer, use
the default value (170
seconds). If more than
one system will be
using the printer, set the
value to *NOMAX,
which causes PSF/400
to wait indefinitely for a
response to an
activation request.
V3R7
V4R1 CRTPSFCFG
CHGPSFCFG ACTRLSTMR *NORDYF Specifies the point at
which the release timer
(RLSTMR) is activated.
Set to *NORDYF. This
means that the release
timer is activated when
there are no spooled
files in the printer’s
output queue with a
status of RDY and the
last page of the last
spooled file processed
has printed. *NORDYF
is used so that all files
with a status of RDY are
printed before releasing
the session (which does
not terminate the
writer).
Table 5. Printer Sharing (continued)
AS/400
Version
Where Set Parameter
Recommended
Value
Description