Printronix Integrated Network Interface Card - Manual (Page 227)

Store Commands
223
store ifc wlan profile
is the interface number for the wireless interface.
is a value in the range of 0 to 6, where:
0 = 802.11 b only
1 = mixed 802.11g,b
2 = mixed 802.11b,g without 5.5, 11 Mbps
3 = 802.11g only
4 = test 802.11g only
5 = 802.11b only without 5.5, 11 Mbps
6 = mixed 802.11b,g with 5.5, 11 Mbps
The default profile value is 1.
Selects the 802.11 g wireless (Wi-Fi) mode in which to operate.
store ifc wlan wpa disable|personal
is the interface number for the wireless interface.
Selects the WPA wireless security mode. The options are
Disable (default) and personal.
store ifc wlan cipher tkip|aes|tkip+aes
is the interface number for the wireless interface.
Selects the WPA wireless security cipher setting. TKIP, AES,
and TKIP+AES are the available settings. TKIP is the default
setting when WPA is enabled.
store ifc wlan passphrase
is the interface number for the wireless interface.
is the passphrase used to
communicate with an access point. The passphrase entered
must be between 8 and 63 ASCII characters long.