Printronix Integrated Network Interface Card - Manual (Page 155)

Setting Up Printing For ASCII Files
151
This selects a generic object that passes the data
unchanged without any escape codes to the printer. Text
files will print in the currently selected printer configuration,
cpi, lpi, and form length. OS/400 versions below V3R7 may
not have this selection and may require manual creation of
a generic WSCST. Please contact Printronix Technical
Support for assistance.
NOTE: For occasional text reports, create a printer configuration
for each report and use the [Job Select] key to select a
report configuration.
Internet Address (INTNETADR)
The IP address of the NIC.
NOTE: You may specify either *INTNETADR (and the NIC IP
address) or the hostname for the NIC (if you added the
printer to the host table entry as directed in “Configuring A
TCP/IP Host Table Entry” on page 147).