Printronix Integrated Network Interface Card - Manual (Page 269)

Printer Logging Through Logpaths
265
13. Log in to the printer by typing:
root
You are given a password prompt.
NOTE: The default is no password. If the FTP program requires a
password, contact your system administrator.
14. At the password prompt, press .
15. Once logged in, type the following sequence at the command
prompt to download the filename.prg file to the printer:
cd dest
cd d1prn
bin
put filename.prg
(where filename.prg is the file name you noted in step 8.)
CAUTION Do not interrupt the downloading process once it has started.
Interrupting a download will damage the flash memory on the
controller board and NIC card.
16. As the file downloads, the FTP program shows the progress as
a percentage. Once the download is complete, exit out of the
FTP program by typing:
quit
17. When the new program has successfully loaded into flash
memory and the printer has reset itself, set the printer power
switch to O (off).
18. Unplug the AC power cord from the printer.
19. Remove the CD from the host computer and store it with the
printer.
20. Using the configuration printout(s), reconfigure the printer and
reload any optional font files.
Downloading Software Through The Network Interface Card (NIC)