Destinations/queues, Models – Printronix Integrated Network Interface Card User Manual

Page 19

Destinations/Queues

For every I/O port on NIC, there is at least one pre-defined logical
print queue or destination to accept print jobs destined for it. This
includes print jobs that are sent directly to the I/O port, such as port
9100. These queue or destination names are pre-defined but can
be changed by the user.

Models

For every destination or queue, there is a pre-defined model
associated with it. The model defines how the print job will be
processed as it passes through to the printer. Models are a set of
mini filters that can be used to modify the print data stream. The
functions available for each model are as follows:

Insert carriage return after line feed

Insert a banner page before or after each print job

Insert header strings to

•

Print using upper tray’s paper

•

Printer using lower tray's paper

•

Print in landscape mode

•

Print in portrait mode

Insert trailer strings to

•

Reset the printer once the print job completes

•

Force the end of the job

•

Perform a form feed at the end of the data