Printronix Integrated Network Interface Card - Manual (Page 225)

Store Commands
221
Set the wireless transfer rate (speed):
store ifc wlan speed auto|<1 2 5 11>
is the interface number for the wireless device.
are the speeds being selected. They are
entered as a list of integers, separated by 'space' characters.
The following values are supported: 1 for 1Mbps, 2 for 2Mbps,
5 for 5.5Mbps, and 11 for 11Mbps. Using the word "auto"
instead of any number will set the card to use automatic
negotiation.
Set the wireless channel number:
store ifc wlan channel default <1-15>
is the interface number for the wireless device.
selects the RF channel number (1 to 15) used
in ad-hoc mode. The word "default" will inform the device
driver to use the card's factory set default channel.
Set wireless antenna type:
store ifc wlan antenna diverse|primary|aux
is the interface number for the wireless device.
is the type of antenna to be used: "primary",
"aux" (auxiliary or external) and "diverse". "diverse" allows the
WLAN card to decide on the optimal antenna during operation.
Set the wireless preamble length:
store ifc wlan preamble default|long|short
is the interface number for the wireless device.
is the type of preamble length required. It can be
"long", "short", or "default". "default" allows the card to use its
own factory-default.
Set the wireless power management mode:
store ifc wlan pmm on|off
is the interface number for the wireless device.
The string "off" disables power-save mode. "on" enables
power-save mode with a default sleep-time of 100ms.