Pitney Bowes PostPerfect B700 - Manual (Page 77)

6-4 SV60941 Rev. B
Installing the
New Cassette 1. Unwrap the new
cassette and pull the
shipping tab from its
back.
2. If necessary, turn
the winder slightly
counterclockwise to
take up any slack in
the ribbon.
3. Hold the new cassette with the ribbon side down and the
opening (print head cutout) aligned with the printhead.
Rest the cassette on the deck. Align the locating tab on
the right side of the cassette with the groove in the cas-
sette compartment. See the figure below.
6 • Replacing the Ribbon