Pitney Bowes PostPerfect B700 - Manual (Page 26)

3-3 SV60941 Rev. B
1. To advance the date, press the +Date key again. This
advances the date by one day. Each time you press the
+Date key, the date advances by one more day. You can
advance the date of submission up to 30 days. If you
attempt to advance the date more than this, the meter
prompts: “30 Days Max” after you press Enter and re-
turns to the current date setting.
You can also advance the date by keying in a num-
ber—from 1 to 30—and pressing Enter while the meter
is in the date setting mode. For example, if you press 6
and Enter, the date advances by six days and the display
returns to the postage amount .
2. To return to the current date, press the C key while the
meter is in the date mode and press Enter. The display
returns to the postage amount.
Checking the
Date
Adjusting the
Stacker
Advancing the
Date
Checking
Postage Funds
Available
Slide the stacker into posi-
tion up against the meter
as shown. This position is
good for envelopes up to
#10. If you're running lon-
ger envelopes, move the
stacker to the right as nec-
essary to accommodate
them.
1. Press $ Available to display the postage funds on hand.
2. Press $ Used to display the amount of postage already
used.
3. Press C (Clear) to return to the default postage display.
Press +Date to check the date. The display shows the date
exactly as it will be printed. Any omitted parts of the date ap-
pear as dashes. (See Omitting the Date below.)
Using the Meter • 3