Pitney Bowes PostPerfect B700 - Manual (Page 44)

4-9 SV60941 Rev. B
This menu lets you turn daylight saving time on or off.
1. The display prompts “Set Daylite Saving Time?”
2. Press Yes.
3. The meter prompts: “Set Daylite Saving On [Off]?”
4. Press Yes or No as appropriate to respond to the prompt.
5. The meter prompts “Daylite Time is On [Off],” depending
on your answer in step 2.
6. The meter prompts “Now XX:XX a(p) Press Enter” where
XX:XX is the time.
7. Press Enter to accept the setting. The meter advances to
the next item on the setup menu.
The meter automatically selects the default ad when you first
turn it on and after it has been inactive for a certain period of
time. You can change the default as follows:
1. The display prompts “Set Advert Default?”
2. Press Yes.
3. The display prompts “Enter Ad Number.”
4. Use the number keys to key in the number of the ad you
want to use as the default.
NOTE: You’ll fi nd ad numbers printed on your slogan car-
tridge (see Chapter 8 for more information.) “Valid” numbers
may range from 0 to 5. Zero (0) means no ad is selected. If
the number you enter isn't valid, the meter briefl y displays
“No Ad,” leaves the current default ad unchanged, and re-
turns to the “Set Advert Default?” prompt.
5. The meter displays the ad number and ad name or
“NONE” if you keyed in zero (0).
6. Press Enter.
7. The meter prompts “Ad Set” and goes to the next item in
the setup menu.
Menu 8:
Select Default
Advertisement
Menu 7:
Set Daylight
Saving Time
Setting Up the Meter • 4