Pitney Bowes PostPerfect B700 - Manual (Page 47)

4-12 SV60941 Rev. B
Menu 12:
Set Postage
Default Value Your meter displays the default postage value when you first
turn it on and when it has been inactive for a period of time.
Think of the default as a standard value the meter always
returns to. The factory-set default is the current rate for first
class postage for mailpieces weighing up to one ounce. You
can change this setting as follows:
1. The display prompts "Set Postage Default?”
2. Press Yes.
3. The display prompts: “Enter Amnt” and shows the current
value.
4. Key in the default value using the number keys and
press Enter. You can key in the decimal point or let the
meter do it for you. For example, press 3, 2, and Enter to
enter $0.32.
5. The display prompts “Amount Set” and the meter ad-
vances to the next item in the setup menu.
NOTE: If you enter a value the meter can't accept, it
prompts “Error,” leaves the current default value unchanged
and returns to the “Set Postage Default?” prompt.
If you make a mistake while entering the new value, or
decide not to change it, press Clear, then Enter. The de-
fault postage amount remains unchanged and the meter
returns to the “Set Postage Default” prompt.
4 • Setting Up the Meter