Pitney Bowes PostPerfect B700 - Manual (Page 30)

3-7 SV60941 Rev. B
Printing a Register Report (B702 and B700 With or
Without Accounting)
1. Press the $ Available key. The display shows the post-
age amount currently available.
2. Place a spare envelope or index card on the deck, as
though you were about to print postage. Guide the enve-
lope up against the rear wall and slide it to the right until
its lead edge is aligned with the trip mark on the deck.
(See the figure in Printing Postage Using the Default
Value.)
3. The display prompts: “Reg Report Press Enter.”
4. Press Enter; the meter prompts “Printing...”
5. The meter will print a register report like that shown be-
low. When printing is done, press Enter to return to the
postage value display and resume processing mail.
AAA PB2000002
05:18P
$14.878
$99985.122
$100000.000
19
18
$14.878
REGISTER REPORT
MAR 17 95
ASCENDING REGISTER
DESCENDING REGISTER
CONTROL SUM
METER PIECE COUNT
BATCH COUNT
BATCH AMOUNT
Printing a
Register Report
Using the Meter • 3