Safety notes, Introduction • 1 – Pitney Bowes PostPerfect B700 User Manual
Page 14
1-7
SV60941 Rev. B
Introduction • 1
Refill
The process of adding postage funds to
your meter using the Pitney Bowes Post-
age By Phone
®
Service. Sometimes called
“resetting” the meter.
Setup
The process of customizing the meter to
best suit your own needs.
Timeout
A period of time, measured from the last
key press or meter trip, after which the me-
ter automatically returns to its default set-
tings. You can set timeout length when you
set the meter up.
Trip
The process of dispensing and account-
ing for postage. The meter is said to “trip”
when it senses the envelope and starts
printing.
Please follow these common-sense precautions whenever
you use your meter:
•
Plug the meter into a properly grounded wall outlet. This
reduces the risk of shock and equipment damage in
the event of a short circuit. DO NOT remove the power
cord's ground pin and DO NOT use a ground adapter.
•
The power cord wall plug is the primary means of dis-
connecting the meter from the AC supply. The meter is
on whenever it is plugged into a live receptacle, even
though the key switch and operator display may be off.
•
Place the meter close to an easily accessible wall outlet.
Avoid using wall outlets controlled by wall switches or
shared by other equipment.
•
Make sure the area in front of the wall outlet into which
the meter is plugged is free from obstruction.
•
DO NOT route the power cord over sharp edges or trap it
between pieces of furniture. Make sure there is no strain
on the power cord.
Safety Notes