Snmp management capabilities, Management information base (mib) support, Snmp trap support – Paradyne U8777 User Manual
Page 12
1. About Hotwire 8777 and 8779 TDM SDSL Units
1-4
May 2002
8700-A2-GB20-40
SNMP Management Capabilities
The termination unit supports SNMP Version 1, and can be managed by any
industry-standard SNMP manager and accessed using SNMP by external SNMP
managers.
Management Information Base (MIB) Support
For a detailed description of supported MIBs, visit Paradyne’s Web site at
www.paradyne.com. The following MIBs are supported:
T
MIB II (RFC 1213 and RFC 2863 (was 1573)) – Defines the general objects
for use with a network management protocol in TCP/IP internets and provides
general information about the unit. MIB II is backward-compatible with MIB I.
T
DS1/E1 MIB (RFC 2495 (was 1406)) – Reports the performance status of the
DSX-1 or G.703 interface and supports the features found on the DSX-1 or
G.703 Performance Statistics screen.
T
Entity MIB (RFC 2037) – Supports all DSLAM cards.
T
Enterprise MIBs – Supports configuration, status, statistics, and tests.
SNMP Trap Support
The Hotwire 8777 or 8779 TDM SDSL Termination Unit supports SNMP traps as
shown in
Standards Compliance for SNMP Traps
.