Pentax K-m/K2000 - Manual (Page 70)

68
B
asi
c Op
er
ati
o
n
s
3
1
Press the K button.
The built-in flash pops up and begins
charging. Flash On mode is used
regardless of the flash mode settings.
When the flash is fully charged,
b
appears in the viewfinder. (p.28)
2
Press the shutter release button fully.
The flash discharges and the picture is taken.
3
Push the flash down to retract.
Using Flash On Mode b , D
When the mode dial is set to a (Flash Off), the built-in flash will not pop up
even if the K button is pressed.