Pentax K-m/K2000 - Manual (Page 43)

41
Getti
n
g
S
tar
ted
2
4
Pull out the DC coupler's electric
cable as shown in the
illustration.
5
Close the battery cover.
See Step 3 on p.38.
6
Connect the DC terminal on the AC adapter to the DC coupler.
7
Connect the AC plug cord to the AC adapter.
8
Plug the AC cord into the power outlet.
• Make sure the camera is turned off before connecting or disconnecting the
AC adapter.
• Make sure connections are secure between the terminals. SD Memory Card and
data will be corrupted if disconnected while the camera is recording or reading data.
• Close the electric cable cover when not using the AC adapter.
Be sure to read the AC adapter kit K-AC84 Operating Manual when using the
AC adapter.
6
7
8