Pentax K-m/K2000 - Manual (Page 188)

186
Pl
ayb
ack F
u
n
cti
o
n
s
7
Connecting the Camera to AV
Equipment
By using the video cable I-VC28 (optional), you can play back images
using a TV or other device with a video IN jack as your monitor.
1
Turn the AV device and camera off.
2
Open the terminal cover, face the arrow on the provided
video cable toward the S mark on the camera, and
connect the video cable to the USB/Video terminal.
3
Connect the other end of the video cable to the video IN
jack on the AV device.
4
Turn the AV device and camera on.
• If you intend to use the camera continuously for a long period, use of the AC
adapter kit K-AC84 (optional) is recommended. (p.40)
• For AV equipment with multiple video IN jacks, check the operating manual
of the AV device, and select the video IN jack to which the camera is
connected.
• Depending on the country or region, images may fail to be played back if the
video output format is set different from the one in use there. If this happens,
change the video output format setting. (p.225)
• The camera monitor turns off while the camera is connected to the AV
device.
UP