Pentax K-m/K2000 - Manual (Page 139)

137
U
sin
g
th
e F
lash
5
1
Set the mode dial to b.
b (Shutter Priority) mode is set.
2
Use the e-dial to set the shutter speed.
The background is not properly exposed if aperture value is blinking
when shutter speed is set. Set the shutter speed so that aperture value
does not blink.
3
Press the K button.
The flash pops up.
4
Take a picture.
1
Set the mode dial to a.
a (Manual) mode is set.
2
Set the shutter speed and aperture value to obtain correct
exposure.
Set 1/180 sec. shutter speed or slower.
3
Press the K button.
The flash pops up.
In a (Manual) mode, you can raise the flash at any time prior to shooting.
4
Take a picture.
Using b (Shutter Priority) Mode
Using a (Manual) Mode