Pentax K-m/K2000 User Manual

Page 262

260

Ap
pe
n

Remote Control

PENTAX Remote Control F (optional) Release shutter
immediately or three seconds after pressing the remote control
shutter release button

Mirror

Quick-return mirror, mirror up function (2 sec. self-timer)

Digital Filter

Toy Camera, High Contrast, Soft, Star Burst, Retro, Extract
color, Illustration, HDR, B&W, Sepia, Color, Slim, Brightness,
Custom

Custom Image

Image Tone (6 types), Saturation/Filter Effect, Hue/Toning,
Contrast, Sharpness/Fine Sharpness

Exposure Bracket

Three frames (underexposed, proper exposure and
overexposed) are shot continuously with exposure bracketing.
(Selectable between 1/2 EV and 1/3 EV for EV steps)

Exposure Meter/
Exposure Range

TTL multi (16-segment metering), Exposure range from EV 0 to
EV 21 at ISO 100, with 50 mm f/1.4 lens, Center-weighted or
Spot metering method can be set

EV Compensation

±3 EV (1/2 EV Steps), ±2 EV (1/3 EV Steps), EV Steps can be
selected

AE Lock

Can be assigned to the = button using the Custom Functions
(timer type: two times the meter operating time set in Custom
Setting) Continuous as long as the shutter release button is
halfway pressed.

Built-in Flash

P-TTL built-in flash with serial control, GN approx. 11 (ISO 100),
Angles of coverage: 28 mm lens angle of view (35 mm
equivalent), Flash synchronization speed range at 1/180 sec.
and slower, Daylight-sync flash, Slow-speed-sync flash, ISO
range = P-TTL: 100 to 3200, Auto-popup function

External Flash Sync

Hot shoe with M-contact, which couples with PENTAX
dedicated auto flashes, ISO range = P-TTL: 100 to 1600,
Automatic flash, Red-eye reduction flash function, High-speed-
sync and wireless-sync with PENTAX dedicated flash

Custom Function

21 functions can be set

Time Function

World Time settings for 75 cities (28 time zones)

Shake Reduction
Function

CCD Image Sensor Shift, effective compensation range = up to
4 EV (dependent on the used lens type and shooting conditions)

Dust Removal

SP coating and CCD operations for dust removal. Can be set to
operate when the camera is turned on.

Power

Four AA lithium, AA Ni-MH rechargeable, or AA alkaline
batteries

Battery Exhaustion

Battery exhaustion symbol ? is lit. (The shutter is locked
when ? starts blinking.)

In/Out Port

USB/Video terminal (USB 2.0 (high speed compatible))

Video Output Format NTSC/PAL