Pentax K-m/K2000 - Manual (Page 143)

141
U
sin
g
th
e F
lash
5
The AF360FGZ itself does not have the function to set the FORMAT size
to [DIGITAL]. However, when it is used with a SLR Digital Camera, the
difference in focal length between 35 mm film camera and the e/
y
is automatically calculated based on the difference in angle of
view (when using DA, DA L, D FA, FA J, FA or F lenses).
The conversion indicator appears and the format size indicator disappears
when the exposure metering timer of the e/y is on (it returns
to 35 mm format display when the exposure metering timer is turned off).
* Using wide-angle panel
You can use [P-TTL Auto] with the AF540FGZ, AF360FGZ, AF200FG or
AF160FC flash unit. The flash pre-flashes before the actual flash and
confirms the subject (the distance, brightness, contrast, whether it is
backlit, etc.) using the camera 16-segment metering sensor. The flash
output for the actual flash is adjusted based on the information obtained
from the pre-flash, enabling flash photography with more appropriate
exposure for the subject than with normal TTL auto.
1 Remove the cover of the hot shoe and attach the external flash.
2 Turn on the camera and the external flash.
3 Set the external flash mode to [P-TTL auto].
4 Confirm that the external flash is fully charged and then take a picture.
About the LCD Panel Display for AF360FGZ
Lens focal length 85mm 77mm 50mm 35mm 28mm 24mm 20mm 18mm
AF360FGZ
LCD panel
Exposure
metering timer
Off
85mm 70mm 50mm 35mm 28mm 24mm *
Exposure
metering timer
On
58mm 48mm 34mm 24mm 19mm 16mm *
Using P-TTL Auto Mode