Patton electronic 3088 Series - Manual (Page 35)

Introduction 35
Model 3088 Series User Manual 2 • Configuration
- RX FIFO Empty
- RX FIFO Slip
• T1/E1 Loss of Signal: Active or Inactive.
• T1/E1 Frame Sync: Searching or Found.
• T1/E1 Frame Errors: Yes or No.
• T1/E1 Buffer Slips: Yes or No.
• Alarms: RED, YELLOW, BLUE. Active or Inactive.
• T1/E1 Error Counters: The following error counters are available:
- Line Code Violations
- Path Code Violations
- Errored Seconds
- Severely Errored Seconds
- Severely Errored Frame Seconds
- Unavailable Seconds
- Controlled Slip Seconds
- Line Errored Seconds
- Bursty Errored Seconds
- Degraded Minutes
Help Commands
The following commands are provided to help the user find the correct command:
• help: Lists all the commands that the console recognizes.
• system help: Lists all the commands that start with system that the console recognizes.
• system set help: Lists all the commands that start with system set that the console recognizes.
• system show help: Lists all the commands that start with system show that the console recognizes.
• dsl help: Lists all the commands that start with dsl that the console recognizes.
• dsl set help: Lists all the commands that start with dsl set that the console recognizes.
• dsl show help: Lists all the commands that start with dsl show that the console recognizes.
• dsl show errcntr help: Lists all the commands that start with dsl show errcntr that the console recognizes.
• t1e1 help: Lists all the commands that start with t1e1 that the console recognizes.
• t1e1 set help: Lists all the commands that start with t1e1 set that the console recognizes.
• t1e1 show help: Lists all the commands that start with t1e1 show that the console recognizes.