About this guide, Audience, Structure – Patton electronic 3088 Series User Manual
Page 10
10
About this guide
This guide describes installing and operating the Patton Electronics Model 3088 G.SHDSL
RocketLink-G™ NTU.
Audience
This guide is intended for the following users:
•
Operators
•
Installers
•
Maintenance technicians
Structure
This guide contains the following chapters and appendices:
•
on page 14 provides information about NTU features and capabilities
•
on page 18 contains an overview describing NTU operation and applications
•
on page 41 provides hardware installation procedures
•
on page 51 provides quick-start procedures for configuring the RocketLink-G NTU
•
on page 55 describes how to install and operate the RocketLink-G NTU
•
on page 60 describes how to configure the RocketLink-G NTU, save the configuration, reset the
NTU to the factory default condition, and upgrade the system software
•
on page 62 describes the system tools that can be used to diagnose problems with the NTU
•
on page 64 contains information on contacting Patton technical support for assistance
•
on page 67 contains compliance information for the RocketLink-G NTU
•
on page 71 contains specifications for the NTU
•
on page 78 provides cable recommendations
•
on page 80 describes the NTU’s ports and pin-outs
For best results, read the contents of this guide before you install the NTU.