Powerware 9355 - Manual (Page 49)

OPERATION
EATON Powerware ® 9355 Parallel UPS (10/15 kVA) User’s Guide S 164201601 Rev A www.powerware.com 43
The following table shows the basic menu structure.
Table 2. Menu Map for Display Functions
Main Menu Submenu Display Information or Menu Function
UPS Status System normal / Battery floating UPS in Parallel mode / Parallel
Unit Number x / Units on CAN Bus / Units on load
Event Log Displays up to 100 events and alarms
Measurements Parallel System Voltage [by unit] / Voltage [Parallel total] / Output Voltage: L-N /
Output Voltage L-L / Output Current / Output Frequency / Output
Power
Output L-N and L-L / Current / Frequency / Power
Battery Voltage / Current / Runtime
Input L-N and L-L / Current / Frequency
Bypass L-N and L-L / Frequency
Control Go to Bypass Mode Transfers the UPS system to internal Bypass mode
When this command is active, the option changes to Go to Normal
Mode.
Start Battery Test Initiates a battery test
Display Test Four different selectable tests for the front panel functions: the
LEDs cycle through, the alarm beep sounds, the backlight turns off
and on, and the pixels scroll through to test the LCD.
Settings User Settings See Table 3 for detail.
Service Settings This screen is password-protected.
Identification UPS Type / Part Number / Serial Number / Firmware / Display /
CAN Bridge
Turn UPS ON/OFF ON and OFF Options UPS Off / System On / System Off