Lochinvar ArmorX2 1.5 - Manual (Page 27)

1
Service
(continued)
Temps Screen:
The Temps Screen displays the various temperatures as
measured by sensors connected to each control module.
Items that can be viewed on the Temps Screen are as follows:
• Inlet 1-2 - This is the water temperature as measured by
the sensor located in the inlet of each heat exchanger.
• Outlet 1-2 - This is the water temperature as measured by
the sensor located in the outlet of each heat exchanger.
• Flue 1-2 - This is the temperature as measured by the
sensor located in the flue connection on each heat
exchanger.
• Set Point - The temperature is the tank set point for a Hot
Water call.
• Tank Sensor - Temperature sensed in the tank by the tank
sensor.
Time - The time is displayed in the upper right-hand corner of
the display. It is displayed in a 24 hour format. Reference the
night setback parameters on page 21 for information regarding
adjusting the date and time.
Status button - Pressing this button displays the Status Screen.
this screen shows the current status of the Armor X2 water
heater. Reference page 12 for more information regarding this
screen.
Main button - Pressing this button displays the Main Screen.
From this screen, navigation to eight (8) other screens is
possible. Reference the Main Screen on page 16 for more
information regarding this screen.
27
Service Manual