Lexmark 8300 Series - Manual (Page 122)

6 If the error:
• Does not reappear, the problem has been corrected.
• Reappears, one of the cartridges is not working properly. Continue with Procedure 2.
Procedure 2
Follow this procedure to determine which cartridge is not working properly.
1 Remove the print cartridges.
2 Disconnect the power supply cord from the electrical outlet.
3 Reconnect the power supply cord to the electrical outlet.
4 If the power button is not lit, press Power.
5 Reinsert the black (or photo) print cartridge.
6 If the error:
• Reappears, replace the black (or photo) print cartridge with a new one.
• Does not reappear, reinsert the color print cartridge.
7 If the error reappears, replace the color print cartridge with a new one.
Carrier Jam
1 Raise the scanner unit.
2 Remove any objects blocking the path of the cartridge carrier.
3 Make sure the cartridge lids are closed.
4 Close the scanner unit.
5 Press .
Error: 2200
1 Raise the scanner unit.
2 Remove any objects blocking the path of the cartridge carrier.
122