Lexmark 4800 User Manual
Page 92
5
Press .
If there is more than one computer connected to the network, you will be asked to select the computer that
you want to use.
a
Press
or
to select a computer.
b
Press .
If you set a PIN during network setup and are being asked for it:
1
Enter the PIN using the
and
to select a digit location and the
and
to select a value for
that digit.
2
Press .
c
Press
to begin saving photos to the computer.
The Network Card Reader dialog appears on the computer screen.
To adjust the settings of the Network Card Reader:
1
Choose Lexmark Network Card Reader
Preferences.
2
If necessary, click General.
3
Choose whether to show a notification dialog when a memory device is inserted into the printer.
4
Click Settings.
5
Assign a name to your computer.
6
Choose whether to specify a PIN to be able to access your computer.
Note: The PIN should be a combination of four digits from 1–9.
7
Click Apply.
These buttons are at the bottom of the Network Card Reader dialog:
Click
To
+
Add a network printer to the list.
–
Remove a network printer from the list.
Connect to a network printer on the list.
Understanding the printer
92