Lexmark 4800 - Manual (Page 114)

Wi-Fi indicator light is not lit
Check power
If the light is not on, see “Power button is not lit” on page 106.
Remove and reinstall the internal print server
1 Turn off your printer, and then unplug the power cord from the wall outlet.
Warning: Failure to unplug the printer can cause damage to your printer and to the internal wireless print server.
Make sure the printer is turned off and the power cord is unplugged from the wall outlet before you proceed.
2 While holding the printer firmly with one hand, hold the internal print server with your other hand and then pull
it away from the printer.
Troubleshooting
114