Linksys E2100L - Manual (Page 47)

Linksys E2100L Appendix B: How to Install and Access USB Storage
44 Advanced Wireless-N Router
4 . Enter your account user name and password . (For the
admin account, admin is both the default user name
and password .) Click OK .
Enter Account User Name and Password
User accounts are set up on the Storage >
Administration screen; for more information, refer to
Storage > Administration, page 29 .
Map a Drive
1 . On your desktop, click the Windows Explorer icon .
Windows Explorer Icon
NOTE: If the Windows Explorer icon is not
displayed, then go to Start > All Programs >
Accessories > Windows Explorer .
2 . In the Address field, enter the local IP address of the
Router:
\\xxx.xxx.xxx.xxx
The default is 192.168.1.1 . You can change this IP
address on the Setup > Basic Setup screen; refer to
Setup > Basic Setup, page 11 .
Enter Local IP Address of Router
NOTE: Another option is to use the server
name of the Router . In the Address field, enter:
\\Ciscoxxxxx
(xxxxx are the last five digits of the Router’s
serial number .) You can change the server name
on the Storage > Administration screen; refer to
Storage > Administration, page 29 .
If you used the setup software for installation,
then enter the name of your wireless network
(up to 15 characters) in the Address field .
3 . Right-click the folder you want to map, and click Map
network drive .
Map Network Drive
4 . From the Drive drop-down menu, select an available
drive letter .
Select Drive Letter
5 . If the login screen appears, enter your account user
name and password . (For the admin account, admin
is both the default user name and password .) Click OK .
Enter Account User Name and Password
User accounts are set up on the Storage >
Administration screen; for more information, refer to
Storage > Administration, page 29 .