Linksys E2100L - Manual (Page 11)

Linksys E2100L Chapter 2: Cisco Connect
8 Advanced Wireless-N Router
3 . Enter a name that will be used to identify this device .
Then click Finish .
Name Your Device
Wireless Printer
1 . Refer to your printer’s documentation to learn how to
connect it to a wireless printer .
2 . Enter the Network name (SSID), Security Key, and
Security Type settings on your wireless printer . To print
this information, click Print these settings .
Connecting a Wireless Printer
3 . Wait until your printer connects . On the Connecting a
wireless printer screen, click Next .
4 . Enter a name that will be used to identify this printer .
Then click Finish .
Name Your Printer
Guest Access
The Guest access settings screen appears .
Guest Access Settings
Allow guest access By default, guest access is enabled .
To disable guest access, select no .
Guest network name By default, the setup software sets
up the name of the guest network .
Password By default, the setup software sets up the
password for the guest network . To change the password,
click Change .
If you clicked Change, the Change guest password screen
appears .
Change Guest Password
• Enter a new guest password Enter a password of
4-32 characters .
• Click Change to save your setting .
Total guests allowed By default, 5 guests are allowed
Internet access through the guest network . Select the
appropriate number of guests allowed on your guest
network; you can select up to 10 guests .
Click Finish to save your settings .